Hardware electric tools are commonly used in the modern industry, which is usually used to drive the electric power, but in the use of the need to pay attention to some matters, the operator in the use of electric tools need to pay attention to what matters?
Electric tool operation note:
1, the tool before use, should check the full-time electrical wiring is correct, prevent the zero line and the line fault caused by accident.
2, long-term dormant or damp tool before use, should be whether it meets the requirements of electrical measuring insulation resistance.
3, the tool comes with a flexible cable or cord shall not take long, when the power supply is far away from the workplace should be solved using the mobile switch box.
4, the tool of the original plug shall not be removed or replaced, when the original plug is damaged, it is forbidden to plug directly into the wire wire insert socket.
5, found the tool shell, handle broken, should stop using, for replacement.
6, non professional personnel shall not be allowed to disassemble and repair tools.
7. The rotating parts of the holding tools shall be protected.
8, operating personnel by the provisions of the protection of insulation products (insulation shoes, insulated gloves, etc.).
9, power supply department, must be equipped with leakage protection device.
10, is strictly prohibited to use, pay attention to the sound and temperature rise, found abnormal should immediately stop check.
In short, for the sake of safety, Yuhuan electric power tools Co., Ltd. recommended that all electric tool operators should be strictly in accordance with the operating rules and the use of attention to the operation of electric tools, to ensure the safety of operation..